Вайзенбургер А., Мюллер Г., Дель Джиакко М., Фетцер Р., Хайнцель А., Джиану А.
Исследовалась коррозия сплавов на основе Fe-Cr-Al путем их выдержки в свинце, содержащем кислород, в интервале температур 400 – 600°C. На диаграммах состояния тройной системы Fe-Cr-Al выделена область устойчивости оксида алюминия для этого температурного диапазона, определен тип полиморфной модификации оксида алюминия, образовавшегося при различных температурах. Обсуждаются вопросы коррозии в условиях трения для некоторых сталей оболочек твэлов (15-15Ti, T91) и стали с алюминиевым покрытием, показаны зависимости износа трущейся поверхности стали в жидком свинце от температуры, нагрузки и амплитуды.
1. LEADER Lead – cooled European advanced demonstration reactor FP7-249661.
2. EUROTANS, European Research programme for the transmutation of high active level nuclear waste in an accelerator driven system, FI6W-CT-2004-516520.
3. Handbook on Lead-bismuth Eutectic Alloy and Lead Properties, Materials Compatibility, Thermalhydraulics and Technologies. OECD-NEA 6195, 2007.
4. Hosemann P., Kabra S., Stergar E., Cappilo M.J., Maloy S.A. Micro-structural characterization of laboratory heats of the Ferric/Martensitic steels HT-9 and T91. Journal of Nuclear Materials, 2010, vol.403, no.1-3, pp. 7-14. doi:10.1016/j.jnucmat.2010.05.005
5. Kurata Y. Corrosion experiments and materials developed for the Japanese HLM systems. Journal of Nuclear Materials, 2011, vol.415, no.3, pp.254-259. doi:10.1016/j.jnucmat.2011.04.039
6. Cinotti L., Smith C.F., Sekimoto H., Mansani L., Reale M., Sienicki J. Lead-cooled system design and challenges in the frame of Generation IV International Forum. Journal of Nuclear Materials, 2011, vol.415, no.3, pp.245-253. doi:10.1016/j.jnucmat.2011.04.042
7. INTERNATIONAL ATOMIC ENERGY AGENCY. (2006). Fast Reactor Database. Available at: http://www-pub.iaea.org/books/iaeabooks/7581/fast-reactor-database-2006-update. (accessed 25 February 2016)
8. Yvon P., Carre F. Structural materials challenges for advanced reactor systems. Journal of Nuclear Materials, 2009, vol.385, no.2, pp.217-222. doi:10.1016/j.jnucmat.2008.11.026
9. Coutsourdis D. Materials for Advanced Power Engineering. Part 1. Dordrecht, 361 KLuwer Academic Publ., 1994.
10. Alemberti A., Carlsson J., Malambu E., Orden A., Cinotti L., Struwe D., Agostini P. European leadcooled fast reactor. Prague, FISA Publ., 2009.
11. Müller G., Heinzel A., Schumacher G., Weisenburger A. Control of oxygen concentration in liquid lead and lead–bismuth. Journal of Nuclear Materials, 2003, vol.321, no.2-3, pp.256-262. doi:10.1016/S0022-3115(03)00250-2
12. Schroer C., Wedemeyer O., Konys J. Aspects of minimizing steel corrosion in liquid lead-alloys by addition of oxygen. Nuclear Engineering and Design, 2011, vol.241, no.12, pp.4913-4923. doi:10.1016/j.nucengdes.2011.09.002
13. Müller G., Schumacher G., Zimmermann F. Investigation on oxygen controlled liquid lead corrosion of surface treated steels. Journal of Nuclear Materials, 2000, vol.278, no.1, pp.85-95. doi:10.1016/S0022-3115(99)00211-1
14. Glasbrenner H., Konys J., Mueller G., Rusanov A. Corrosion investigations of steels in flowing lead at 400°C and 550°C. Journal of Nuclear Materials, 2001, vol.296, no.1-3, pp.237-242. doi:10.1016/S0022-3115(01)00522-0
15. Strauss D., Müller G., Schumacher G., Engelko V., Stamm W., Clemens D., Quaddakers W.J. Oxide scale growth on MCrAlY bond coatings after pulsed electron beam treatment and deposition of EBPVD-TBC. Surface and coatings Technology, 2001, vol.135, no.2-3, pp.196–201. doi:10.1016/S0257-8972(00)00916-6
16. Weisenburger A., Heinzel A., Müller G., Muscher H., Rousanov A. T91 cladding tubes with and without modified FeCrAlY coatings exposed in LBE at different flow, stress and temperature conditions. Journal of Nuclear Materials, 2008, vol.376, no.3, pp.274-281. doi:10.1016/j.jnucmat.2008.02.026
17. Engelko V., Yatsenko B., Mueller G., Bluhm H. Pulsed electron beam facility (GESA) for surface treatment of materials. Vacuum, 2001, vol.62, no.2-3, pp.211-216. doi:10.1016/S0042-207X(00)00446-2
18. Weisenburger A., Jianu A., Doyle S., Bruns M., Fetzer R., Heinzel A., DelGiacco M., An W., Müller G. Oxide scales formed on Fe–Cr–Al-based model alloys exposed to oxygen containing molten lead. Journal of Nuclear Materials, 2013, vol.437, no.1-3, pp.282-292. doi:10.1016/j.jnucmat.2013.02.044.
19. Jianu A., Müller G., Weisenburger A., Heinzel A., Fazio C., Markov V.G., Kahtanov A.D. Creep-torupture tests of T91 steel in flowing Pb–Bi eutectic melt at 550°C. Journal of Nuclear Materials, 2009, vol.394, no.1, pp.102-108. doi:10.1016/j.jnucmat.2009.08.013
20. Weisenburger A., Jianu A., An W., Fetzer R., Del Giacco M., Heinzel A., Müller G., Markov V.G., Kahtanov A.D. Creep, creep-rupture tests of Al-surface-alloyed T91 steel in liquid lead bismuth at 500 and 550°C. Journal of Nuclear Materials, 2012, vol.431, no.1–3, pp.77-84. doi:10.1016/j.jnucmat.2011.11.027
21. Van den Bosch J., Sapundiev R.W., Almazouzi A. Liquid metal embrittlement susceptibility of ferritic–martensitic steel in liquid lead alloys. Journal of Nuclear Materials, 2008, vol.376, no.3, pp.322-329. doi:10.1016/j.jnucmat.2008.02.008
22. Del Giacco M., Weisenburger A., Mueller G. Fretting corrosion in liquid lead of structural steels for lead-cooled nuclear systems: Preliminary study of the influence of temperature and time. Journal of Nuclear Materials, 2012, vol.423, no.1–3, pp.79-86. doi:10.1016/j.jnucmat.2012.01.007
